NETGEAR XS724EM-100AJS
NETGEAR (XS724EM) 24-PORT 10G/MULTI-GbE PLUS SWITCH, 10G SFP+(2), DESKTOP/RACKMOUNT
Our Price: Request a Quote
More pricing below, click here!
Please Note: All Prices are Inclusive of GST
Overview:
Unlock your Network Potential with 10-Gigabit/Multi-Gigabit 5-Speed Networking Switches
Revolutionary 5-speed 10-Gigabit/MultiGigabit technology built in the NETGEAR multi-speed switches allows your devices to speed past the Gigabit barrier.
With the growth of virtualization, flash Storage, 4K videos , video streaming and IP surveillance, SMB networks need to extend beyond 1 Gigabit 10-Gigabit/Multi-Gigabit Plus series from NETGEAR presents the right solution for this requirement; delivering unprecedented 10-Gigabit/Multi-Gigabit bandwith at an affordable cost.
Each port automatically detects which speed is needed by the connected device and provides the adequate speed. As opposed to regular 10-Gigabit switches that will only provide 1-Gigabit connectivity to any device that require less than 10-Gigabit, the XS512EM and XS724EM gives the exact speed required, no downgrade. Also, the new NETGEAR Multi-speed switch ports can be connected with regular Cat5E Ethernet cables, without the need to upgrade to Cat6/Cat6A wiring, therefore reducing wiring costs and hassle
Highlights
Hardware Highlights
- 5-speed Networking :
- XS512EM-12-port 10-Gigabit/Multi-Gigabit
- XS724EM-24-port 10-Gigabit/Multi-Gigabit
- 2 -Port SFP+ (combo) for fiber uplinks
- Rackmount or Desktop
- Internal power supply to eliminate power brick
- Active fans for whisper quiet operation
- 50°C Maximum Operating Temperature
- Compact Small Form Factor (XS512EM)
Software Highlights
- VLAN support for traffic segmentation
- Quality of Service (QoS) for traffic prioritization
- Auto “denial-of-service” (DoS) prevention
- Link Aggregation to add redundancy and increase your network speed (Static LAC and LACP supported)
- Loop prevention and broadcast storm controls
- IGMP snooping v1, v2 and v3 support for multicast optimization
- Rate limiting for better bandwidth allocation
- Port mirroring for network monitoring
- Jumbo frame support
- Energy Efficient Ethernet (IEEE802.3az) support for maximum power savings
- Troubleshoot connection issues via cable test
Industry leading warranty
- Limited Lifetime* 24/7 Technical Support
- Limited Lifetime* Hardware Warranty
Features:
HARDWARE FEATURES
10GBASE-T Connections
Support low-latency, line-rate 10G Copper “BASE-T” technology with backward compatibility to Gigabit Ethernet and Fast Ethernet. Cost-effectively migrate current network to 10G capacity by utilizing the existing Cat 6 RJ45 short connections (up to 45m) and Cat 6a / Cat 7 connections up to 100m.
10GBASE-X SFP+ ports
Providing flexibility to uplink to 10G-capable core or aggregation switches that support fiber links. Backward compatible to Gigabit fiber. Support copper or fiber modules.
Multi-Gigabit Connections
Support line-rate 2.5G/5G "NBASE-T" technology with backward compatibility to Gigabit Ethernet and Fast Ethernet. Upgrade your current network without upgrading your existing cabling, thanks to Multi-Gigabit you will be able to run 5G and 2.5G over connections up to 100m.
SOFTWARE FEATURES
Comprehensive QoS Features
Advanced controls for optimized network performance and better delivery of mission-critical traffic such as voice and video. Ingress and egress rate limiting allows for bandwidth shaping for mitigating network resources constraints or for optimizing guest access bandwidth on the network.
Port-based or 802.1p-based prioritization
Layer 3-based (DSCP) prioritization
Port-based ingress and egress rate limiting
IGMP Snooping
For improved network efficiency on delivering multicast traffic. Save cost and improve network efficiency by ensuring multicast traffic only reaches designated receivers without the need of an extra multicast router.
Loop Detection / Auto DoS Prevention
Detect accidental network loops and protect against DoS (Denial of Service) attacks.
Port-based & 802.1Q-based VLANs
Port-based & 802.1Q-based VLANs
Port Trunking / Link Aggregation (LAG)
Build up bigger bandwidth to support aggregated uplink/downlink traffic.
Energy Effiecient Ethernet (IEEE 802.3az)
For maximum power savings and reduced energy costs.
Port Mirroring
For better and quicker network diagnostics and troubleshooting.
Cable Test
Easily identify bad Ethernet cables.
Specifications:
| NETGEAR XS724EM-100AJS Specifications | |
|---|---|
| Physical Specification |
Dimensions (WxDxH) @mm : 440 x 204 x 43 mm (17.3 x 8.0 x 1.7 in)
Weight (kg) : 3.72kg (8.21 lb) |
| Technical Specification |
100M/1G/2.5G/5G/10G RJ-45 copper ports : 24
SFP+ Ports : 2 (shared) Form Factor : Rackmount Packet buffer memory : 3MB Bandwidth : 480Gbps MAC Address database size : 32K VLAN (# supported) : 64 Number of LAGs & number of members : 8 LAGs with max 8 members in each LAG Supported multicast groups : 128 Max number of source ports allowed (many to one port mirroring) : 23 Fan(s) : 2 (active fans) IEEE 802.3az (Energy Efficient Ethernet) : Yes Max power consumption (Watts) : 76.56W LEDs : Power, Speed, Fan, Link/Activity Acoustic noise level @ 25° C (dBA) : 35.91dBA Operating temperature : 0° to 50° C Electromagnetic compliance (A or B) : A |
| Support & Warranty |
Warranty: This product is backed by a NETGEAR ProSAFE ® Limited Lifetime Hardware Warranty .
Lifetime Next Business Day Hardware Replacement. Click here for coverage, availability and terms and conditions. Support : ProSUPPORT 24x7 Advanced Technical Support via phone for 90 days (Remote diagnostics performed by our technical experts for prompt resolution of technical issues). ProSUPPORT coverage can be extended by purchasing one, three, or five year contracts. ProSUPPORT Lifetime 24x7 Advanced Technical Support via chat. |
Diagram:
Documentation:
Download the NETGEAR (XS724EM) 24-PORT 10G/MULTI-GbE PLUS SWITCH, 10G SFP+(2), DESKTOP/RACKMOUNT Datasheet (PDF).
Pricing Notes:
- All Prices are Inclusive of GST
- Pricing and product availability subject to change without notice.
Our Price: Request a Quote